Specifications

Using EPSON Net!2 and the Ethernet Card Home Page 10-11
IP Address Configuration settings
AppleTalk Configuration settings
Items Explanations
IP Address Setting Select the method of acquiring an IP address from
the following: Manual, RARP, BOOTP, or DHCP.
IP Address Set the IP address for the Ethernet card.
Subnet Mask Set the subnet mask of the IP address.
Default Gateway Set the gateway.
Items Explanations
Printer Name Shows the name of the printer with the interface
card.
Entity Type Shows the Entity type of the printer attached with
the interface card.
Zone Name Select an AppleTalk zone.
Network Number
Set
Specify the setting method for the AppleTalk
network number.
Network Number
for Manual Mode
Type the network number.
Return to Default Resets all configuration settings of the Ethernet
card to the default settings. This is the same as
initializing the Ethernet card.
Cancel Cancels the changes and returns to the EPSON
Net!2 dialog box.
Send Sends the settings for the Ethernet card to the
printer.
Chap10.fm Page 11 Friday, August 21, 1998 11:32 AM