Specifications

EPSON EPL-N1600 Chapter 3 Troubleshooting
Rev. A 98
3.15 MISREGISTRATION
Problem Suspect Components
The printed is not centered on the
pa
g
e or is bleedin
g
off the pa
g
e.
The followin
g
components are assosiated with
this specific problem. One or more of these
components ma
y
have failed partiall
y
or
completel
y
. If
y
ou can not isolate the problem
usin
g
this procedure, replace each components
listed below, one at a time, until the problem
disappears.
• PWBA Hotaru
• C258MAIN Board
Step Action and Question Yes No
1
PAPER CONDITION
• Is the paper damp?
• Is the paper wrinkled?
Replace with
new, dr
y
paper.
Go to Step 2.
2
PAPER FEED
Observe the paper feedin
g
.
Is the paper fed crooked?
Go to “Skewed
Ima
g
e”.
Go to Step 3.
3
PAPER PATH
Inspect the entire paper path for an
y
ostructoion or contamination.
Is the paper path free of obstruction
or contamination?
Go to Step 4. Clean or
remove the
obstruction in
the paper path.
4
C258MAIN BOARD
Replace the C258MAIN and Print test
ima
g
e.
Is the print ima
g
e normal?
Problem solved. -----