Specifications

EPSON EPL-N1600 Chapter 3 Troubleshooting
Rev. A 93
3.10 GHOST PRINT
Problem Suspect Components
There are
g
host ima
g
e appeared
on the ima
g
e. The ima
g
e ma
y
be
either
g
hosts of the previousl
y
printed pa
g
e or the part of the
ima
g
e bein
g
printed on the
current pa
g
e.
The followin
g
components are assosiated with
this specific problem. One or more of these
components ma
y
have failed partiall
y
or
completel
y
. If
y
ou can not isolate the problem
usin
g
this procedure, replace each components
listed below, one at a time, until the problem
disappears.
• No recommendation
Step Action and Question Yes No
1 REPETITIVE PRINTING
Inspect the
g
host ima
g
e.
Was the user printin
g
numerous
copies of the same ima
g
e?
Go to Step 2. Go to Step 3.
2 Print 30 pa
g
es of various ima
g
es.
Do
g
host ima
g
e still appear?
Go to Step 3. Problem
solved.
Avoid printin
g
the same ima
g
e
for man
y
copies.
3 IMAGING CARTRIDGE
Install a new Ima
g
in
g
Cartrid
g
e.
Is the print ima
g
e normal?
Problem solved. Go to Step 4.
4 ROLL FUSER AND ROLL PRESS
1. Remove the Fuser Ass
y
.
2. Inspect the Roll Fuser and the Roll
Press for scratches and
contamination.
Are these Rolls free of scratches and
contamination?
Go to suspect
component.
Replace the
Roll Fuser or
the Roll Press.