Specifications

EPSON EPL-N1600 Chapter 3 Troubleshooting
Rev. A 72
1.6 ERROR MESSAGE “EXITING PAPER JAM”
Check if this error messa
g
e appears even if no paper Jam in the paper
exit section has been occured.
1.7 ERROR MESSAGE “PAPER JAM”
Check if this messa
g
e appears even if no paper jam over the Sensor
Re
g
istration or between the Sensor Re
g
istration and the Sensor Exit
has been occured.
Step Actions and Questions Yes No
SUSPECT COMPONENTS
The followin
g
components are
associated with this specific problem.
One or more of these components ma
y
have failed partiall
y
or completel
y
. If
y
ou
cannot isolate the problem usin
g
this
FIP, replace each component listed
below, one at a time, until the problem
disappears.
• Actuator-exit and Sensor Exit
• Actuators Exit-2L/2S and Sensor Exit-
2
• C258MAIN Board
1
ACTUATOR-EXIT AND SENSOR EXIT
• Does the Actuator-exit move
smoothl
y
?
• Is the output level of the Sensor Exit at
CN226-2 on the C258MAIN chan
g
e
when
y
ou actuate the actuator-exit?
Go to step 2. Replace the
Sensor
Assembl
y
Photo Exit.
4
ACTUATOR EXIT-2L/2S AND SENSOR
EXIT-2
• Do the Actuators Exit-2L/2S move
smoothl
y
?
• Is the output level of the Sensor Exit 2
at CN226-5 chan
g
e when
y
ou actuate
the actuator exit-2L/2S?
Replace the
C258MAIN
Board.
Replace the
Sensor Photo.
Step Actions and Questions Yes No
SUSPECT COMPONENTS
The followin
g
components are
associated with this specific problem.
One or more of these components ma
y
have failed partiall
y
or completel
y
. If
y
ou cannot isolate the problem usin
g
this procedure, replace each
component listed below, one at a time,
until the problem disappears.
• Roll Re
g
istration Assembl
y
and Roll
Pinch Re
g
istration
• Fuser Assembl
y
• Actuator-Exit and Sensor Exit
• Drive Assembl
y
Main
• Drive Assembl
y
-F/P
• PWBA Hotaru
• C258MAIN Board
1 Does the jammed sheet of paper reach
the Sensor Exit?
Go to step 2. Go to step 3.
2
ACTUATOR-EXIT AND SENSOR
EXIT
• Does the Actuator-exit move
smoothl
y
and have a sprin
g
action
return?
• Is the output level of the Sensor Exit
at CN226-2 on the C258MAIN
chan
g
e when
y
ou actuate it?
Replace the
C258MAIN
Board.
Replace the
Sensor
Assembl
y
Photo
Exit.
3
PAPER CONDITION
Is the paper in the Paper Cassette or
MBF wrinkled or damp?
Replace the
paper with
fresh, dr
y
paper.
Go to step 4.