Specifications

EPSON EPL-N1600 Chapter 1 Product Description
Rev. A 18
1.2.4 ELECTRICAL SPECIFICATIONS
Power Requirements: See table below.
Table 1-4. Power Supply Specification
AC Line Noise: Pulse width= 50 to 1000 ns
Pulse polarity=+ / -
Repetition= Asynchronous
Modes= Common / Normal
Volta
g
e= 1KV
(Parts must be able to withstand 2KV without
dama
g
e)
Transient Outa
g
e: DIP 100% (at rated volta
g
e - 10%) 1 cycle
Electrostatic Tolerance: <upto 10KV>
No hard error, no user-nonrecoverable
software error
<upto 15KV>
No dama
g
e to parts
Sur
g
e Current: 1/2-cycle / Not above 50A
Insulation Resistance: 10Mohm or more
Dielectric Stren
g
th: Insulation shall not break down when the
followin
g
volta
g
e is applied between primary
circuit and chassis for 1 minute:
*100V model: AC1000V
*200V model: AC1500V
Leaka
g
e Current: 3.5mA or less
1.2.5 CONSUMABLES
This printer's only consumable part is the Ima
g
in
g
Cartrid
g
e.
Table 1-5. Imaging Cartridge
*: Toner life is estimated based on continuous printin
g
on A4 size paper with 5% print
covera
g
e. Toner life will var
y
accordin
g
to print covera
g
e and printin
g
method
(continuous or intermittent, print densit
y
, toner-save mode, etc.).
1.2.6 OTHER SPECIFICATIONS
Printer life: 300,000 sheets or 5 years in use
Noise: Stand-by: Approx. 32.0dB(A)
Operatin
g
: Approx. 50.0dB(A)
Ozone Density: Less than 0.02 ppm
Toxicity: OPC, toner, and plastic materials are all
nontoxic.
Item 100V Model 200V Model
Input Volta
g
e 120V ±10%
(90 to 132V)
220 - 240V ±10%
(198 to 264V)
Rated Frequenc
y
50 - 60Hz ±3Hz 50 - 60Hz ±3Hz
Rated Current 6.5A 3.5A
Power Consumption • Maximum: 700W
• Continuous printin
g
: 350W
•Stand-b
y
(Heater ON): 70W
•Stand-b
y
(Heater OFF): 30W
Name Components Life Weight
Ima
g
in
g
Cartrid
g
e
S051056
• Development unit
• Toner
•OPC Drum
• Char
g
in
g
Roller
• Waste Toner Box
• Cleaner Blade
Avera
g
e:
8500 pa
g
es *
Approx. 1.3K
g