Specifications

EPSON EPL-N1600 Chapter 1 Product Description
Rev. A 17
Prohibited paper types: The followin
g
paper types should never be
used. Attempts to feed these paper types
may result in inferior print quality, paper jams,
and dama
g
e to the printer.
*Carbon paper, "non-carbon" paper
*Thermal paper, pressure-sensitive paper
*Acidic paper
*Inkjet-dedicated paper
*Paper or postcard already printed on by
thermal-transfer printer or inkjet printer
*Thin or thick paper (exceedin
g
the
specification)
*Damp paper
*Paper with coated or processed color
surface
*Paper with extra smooth or extra rou
g
h
surface
*Paper whose rear side has very inconsistent
smoothness
*Perforated paper
*Folded, curled, or torn paper
*Paper of irre
g
ular shape
*Paper cut at off-an
g
le
*Label sheets that peel too easily
*Paper with clips, staples,
g
lue, etc.
*Transparency film desi
g
ned for color copy or
pa
g
e printer
Paper Ejection: Face-down or Face-up (option)
Ejection capacity: <Face-down>
250 sheets (Xerox 4024 paper (75
g
/m²))
<Face-up> (with optional face-up tray)
40 sheets (Xerox 4024 paper (75
g
/m²))
1.2.3 CONTROLLER SPECIFICATIONS
CPU: RISC-CPU (VR4300 / 150MHz)
RAM: <Standard> 8MB EDO RAM
<Optional> 1 EDO-RAM SIMM slot
(Accepts 4MB to 32MB EDO-RAM SIMM)
Maximum memory is 40MB
ROM: Font: 2MB (on-board)
Pro
g
ram: 4MB (on ROM-DIMM module)
(Installed in ROM-DIMM socket)
Expansion ROM: 2 ROM-DIMM slots (A/B slots)
A slot=For C83229* (EPSONScript) module
B slot=For local-font ROM module only
Interfaces: <Standard>
*Bidirectional parallel I/F (B type connector)
(IEEE-1284 compliant / Compatibility, Nibble
and ECP mode)
*RS-232C serial I/F (D-SUB 25pin)
<Optional>
*Type-B interface slot (1 slot)
Control Panel: *8 push-button switches and 6 LED lamps.
*LCD Panel (1-line 20-column)
Software: *PCL5e emulation mode
*FX, ESC/P2, I239X emulation mode
*ESC/Pa
g
e mode
*GL/2 mode
Other Feature: Built-in en
g
ine controller