Specifications

EPSON EPL-N1600 Chapter 4 Disassembly and Assembly
Rev. A 4-136
4.3.27 Roll Assembly Exit Out
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Release the latch on the Bearin
g
-Exit Roll SP (PL5.1.5: ri
g
ht
bearin
g
) and slide the Bearin
g
off of the shaft.
7. Release the latch on the Gear Exit Out, and slide the Roll Assembly
Exit Out to the ri
g
ht to
g
et the left end of the shaft out of the Bearin
g
-
Exit Roll (PL5.1.6: left bearin
g
).
8. Remove the Roll Assembly Exit Out out of the left bearin
g
hole.
9. Remove the Roll Assembly Exit Out and the Bearin
g
-Exit Roll.
Figure 4-33. “Roll Assembly Exit Out” Removal