Specifications

EPSON EPL-N1600 Chapter 4 Disassembly and Assembly
Rev. A 4-124
4.3.15 Actuator Exit-2/L, -2/S and Sensor Photo
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the three screws that secure the Plate Base Actuator, and
remove the Plate Base Actuator, takin
g
care to keep the Actuator
Exit-2/L and -2/S mounted on the Plate in place.
7. Note how the Sprin
g
Exit- 2/L and -2/S are attached to the
Actuators.
8. Lift the Actuator Exit-2/L, alon
g
with the Sprin
g
Exit-2/L, out of the
Plate.
9. Lift the Actuator Exit-2/S, alon
g
with the Sprin
g
Exit-2/S, out of the
Plate.
10. Press to
g
ether the hooks of the Sensor Photo while pushin
g
the
Sensor out throu
g
h the Frame.
11. Disconnect J285 from the Sensor Photo.
Figure 4-21. “Actuator Exit-2/L,2/S and Sensor Photo” Removal