Specifications

EPSON EPL-N1600 Chapter 4 Disassembly and Assembly
Rev. A 4-116
4.3.7 Roll Assembly Feed
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the C258MAIN Board.(Section 4.3.49)
7. Remove the Shield Assembly Bottom (E).(Section 4.3.44)
8. Remove the PWBA Hotaru.(Section 4.3.48)
9. Remove the Chassis Assembly PS. (Section 4.3.46)
10. Set the printer on the rear surface.
11. Press the Roll Assembly Feed to slide it to the ri
g
ht on the shaft.
12. Press on the flat side of the Roll Assembly Feed away from the
shaft.
Figure 4-13. “Roll Assembly Feed” Removal