Specifications

EPSON EPL-N1600 Chapter 4 Disassembly and Assembly
Rev. A 4-114
4.3.5 Chute Inlet Registration
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the ROS Assembly. (Section 4.3.37)
7. Remove the Latch R and L.(Section 4.3.50)
8. Remove the Shaft Latch. (Section 4.3.51)
9. Remove the six screws that secure the An
g
le to the Printer Frame.
10. Remove the An
g
le, alon
g
with the attached Chute Inlet Re
g
istration,
from the Printer Frame.
11. Remove the two screws that secure the Chute Inlet Re
g
istration to
the An
g
le and separate the Chute from the An
g
le.
12. Remove the screw that secures the Plate Earth Chute to the An
g
le
and separate the Plate Earth Chute from the An
g
le.
Figure 4-11. “Chute Inlet Registration” Removal