Specifications

LQ-2180 Revision A
Adjustment Overview 34
Figure 4-2. Destination Selection Screen
8. Check the printer to be adjusted for the destination; NLSP or
Standard, then select the destination and press the Enter key.
9. The following screen appears.
Figure 4-3. Main Menu Selection Screen
10. Select “Perform”. The following screen appears.
Figure 4-4. Main Menu Screen
CAUTION
Be sure to select the proper destination. If you select
“Standard” despite you printer is NLSP version, the
printer may not print NLSP characters.
<*><*><*> EPSO N SID M Printer Service Program boot process <*><*><*>
Select the destination.
Standard
NLSP
E S C :Q u it U P /D o w n :S e le c t E N T E R :D e te r m in e
CAUTION
„
Select “No” if you have input a wrong model name in
the screen shown in Figure 4-1.
„
If you select “Got”, the printer flashes the model
name stored in the RAM to the EEPROM once and
reads it again.
<*><*><*> EPSO N SIDM Printer Service Program boot process <*><*><*>
D o you start the S ervice P rogram ?
P e rfo rm (B o o t th is P R O G R A M )
N o (R e -s e le c t m o d e l n a m e )
G o t (C h e c k th is m o d e l n a m e )
E S C : Q u it U P /D o w n : S e le c t E N T E R : D e te rm in e
************** L Q -2 1 8 0 S E R V IC E P R O G R A M V e rs io n 1 .0 **************
<><> SERVICE ITEM S <><>
1. Bi-D Adjustm ent
2. Print Data on EEPRO M
3. Set or reply S tarting date
4. TPE R eset
E S C :Q u it U P /D o w n :S e le c t E N T E R :D e te r m in e