Service manual

Disassembly and Assembly
ESPON FX-880/FX-1180 Service Manual
3-27
Rear PE Sensor Removal
1. Remove the printer mechanism (see page 3-17).
2. Carefully stand the printer mechanism on end.
3. Release the 2 hooks securing the rear PE sensor to the rear paper guide.
4. Release the 2 hooks attaching the rear paper guide to the sensor, slide the sensor to the rear, and pull
down to remove it.
5. Disconnect the cable from the sensor.
Rear PE Sensor
Hooks
Rear Paper Guide
Rear Frame
Figure 3-18. Rear PE Sensor Removal