Service manual

Disassembly and Assembly
ESPON FX-880/FX-1180 Service Manual
3-21
PF Motor Removal
1. Remove the printer mechanism (see page 3-17).
2. Release the motor cable from the printer mechanism.
3. Set the release lever to the tractor feed position (forward).
4. Remove the 2 CBS (M3 × 8) screws securing the PF motor to the right sub frame, then remove the
PF motor.
CAUTION
If the release lever is in the friction feeding position, the PF motor cannot be removed.
PF Motor
CBS Screw (M3 x 8)
Right Subframe
Release Lever
Cable
Figure 3-12. PF Motor Removal
MOVE LEVER
FORWARD