Service manual

Disassembly and Assembly
3-6
ESPON FX-880/FX-1180 Service Manual
Printhead Removal
1. Remove the top cover.
2. Remove the 2 CBS screws (M3 x 8) securing the printhead to the carriage assembly.
3. Disconnect the FFC from the printhead and remove the printhead.
WARNING
Wait for five minutes after unplugging the printer before removing the printhead; it is very hot and
needs to cool down.
CAUTION
After replacing the printhead, perform the platen gap adjustment (see Chapter 4).
CBS (M3 x 8)
Head FFC
Printhead
Figure 3-2. Printhead Removal