Service manual

Product Description
EPSON FX-880/FX-1180 Service Manual
1-25
Note that in the following table, factory settings are shown in bold.
Table 1-31. Default Settings (Mode 2)
Item Setting/Value
Page length for front tractor 3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5 inch,
11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
Page length for rear tractor 3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5 inch,
11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
Character tables
Italic, PC437, PC850, PC860, PC863, PC865, PC861, BRASCII,
Abicomp, ISO Latin 1, Roman 8
NLSP version:
Italic, PC437, PC437 (Greek), PC774, PC850, PC852, PC853,
PC855, PC857, PC866, PC866 (Latin), PC866 (UKR), PC869, ISO
Latin 1T, MAZOWIA, Code MJK, Bulgaria, Estonia, ISO 8859-2, ISO
8859-7
International character sets for
Italic table *
Italic U.S.A, Italic France, Italic Germany, Italic U.K., Italic
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
Note:
* The options available for this setting vary by country.
Restoring Factory-Set Defaults
You can return all settings to their factory defaults by pressing the Tear Off/Bin and Load/Eject buttons
while turning on the printer.
Bidirectional Adjustment Function
The bidirectional adjustment function allows you to adjust alignment at the following print speeds:
High-speed draft mode
Draft mode
NLQ mode
The bidirectional adjustment can be performed either with a stand-alone printer, or using the adjustment
program with a host computer connected to the printer. With a stand-alone printer, enter the bidirectional
adjustment mode by pressing the Pause button while turning on the printer; the flowchart on the next page
outlines this procedure.