Service manual

Product Description
1-8
EPSON FX-880/FX-1180 Service Manual
Envelopes
Table 1-10. Specifications for Envelopes
Envelope type No.6 No.10
Width
6.5 inches (165 mm) 9.5 inches (241 mm)
Length
3.6 inches (92 mm) 4.1 inches (105 mm)
Insertion
Rear entry only
Total thickness
0.0063 to 0.020 inches (0.16 to 0.52 mm)
The variation in thickness in the print area, due to envelope construction,
must be within 0.0098 inches (0.25 mm).
Weight
12 to 24 lb (45 to 90 g/m
2
)
Quality
Airmail envelopes without glue on the flap, bond envelopes, and plain
envelopes.
Notes:
1. Printing on envelopes should be done only at normal temperatures and humidity.
2. Do not use CSF bin 2 when printing on envelopes.
3. Insert the longer side of the envelope horizontally.
Figure 1-3. Margins for Envelopes
Continuous Paper
Table 1-11. Specifications for Continuous Paper (single sheet and multi-part)
Insertion
Front entry, rear entry, bottom entry
Width
FX-1180:
FX-880:
4 to 16 inches (101.6 to 406.4 mm)
4 to 10 inches (101.6 to 254 mm)
Length
4 to 22 inches (101.6 to 558.8 mm)
Copies
1original + 5 copies
Total thickness
0.0025 to 0.018 inches (0.065 to 0.46 mm)
Weight
14 to 22 lb (52 to 82 g/m
2
)
Weight (multi-part)
12 to 15 lb (40 to 58 g/m
2
)
Quality
Plain paper, recycled paper, carbonless multi-part
Joining
Apply small dots of glue, or paper staple (crimp) both the right and left sides.
A
B
B
A
A The minimum top and bottom margins are 0.17 inch (4.2 mm).
B The minimum left and right margins are 0.12 inch (3 mm).