Service manual

Product Description
EPSON FX-880/FX-1180 Service Manual
1-5
Table 1-4. Print Resolution
Print Mode Horizontal density Vertical density Adjacent dot printed?
High-speed draft 90 dpi 72 dpi No
Draft 120 dpi 72 dpi No
NLQ 240 dpi 144 dpi No
Bit image 60, 72, 80, 90 or
120 dpi
72 dpi Yes
120 or 240 dpi 72 dpi No
Control codes ESC/P and IBM 2380/2381 Plus character emulation.
Paper Handling Specifications
Paper feed methods Friction feed (front, rear)
Push tractor (front, rear)
Pull tractor (front, rear, bottom)
Push and pull tractor (additional tractor required)
CSF bin1/bin2 (optional)
Roll paper holder (optional)
Paper path Manual Insertion Front in, front out
CSF Rear in, front out
Tractor Rear, front, or bottom in, front out
Paper capacity Single-bin cut-sheet feeder:
up to 50 sheets of 22 lb (80 g/m
2
) paper
Note:
The total thickness of the paper stack can be up to 0.20 inches
(5 mm).
High-capacity cut-sheet feeder:
up to 150 sheets of 22 lb (82 g/m
2
) paper
up to 25 plain or bond envelopes
up to 30 airmail envelopes
Note:
The total thickness of the paper stack can be up to 0.59 inches
(15 mm).
Line spacing 1/6 inch or programmable in increments of 1/216 inch