Service manual

Maintenance
6-2
EPSON FX-880/FX-1180 Service Manual
Table 6-2. Lubrication Points
Ref. No. Lubrication Points Lubricant
1 Cam surface on the 34.5 mm spur gear G-26 (5 mg)
2 The shaft end of the PF drive roller assembly G-26 (5 mg)
3 The platen gap adjustment slots on the left frame (excluding
the two slots at the bottom)
G-26 (3 mg for
each slot)
4 Oil pad O-2 (0.6 ml)
5 The contact points for the gear and shaft in the ribbon drive
assembly
G-26 (3 mg)
6 The inside hole and three shafts in the ribbon drive assembly G-26 (3 mg)
7 Various contact points for the ribbon drive gear assembly G-26 (3 mg)
8 6 contact points for the paper guide and release shaft. G-26