User`s guide

Appendix D:Troubleshooting
54 - PShop User’s Guide
parameters are being passed to GhostScript and whether the file sent to the print
queue is sent correctly.
e-mail from lp
On some systems (particularly SVR4-based systems), lp will send e-mail to you
describing the exit code of a PShop print job if the job was not successful. The
exit code is more useful in detecting usage problems than configuration
problems. The table below lists possible exit codes and an explanation of each.
System References
A number of system-related files are referenced by PShop. The locations of these
files are system dependent and are described in the following table
Code Error Explanation
1 ERR_HANGUP The script received a hang-up (HUP) signal.
2 ERR_INTR The script received an interrupt (INTR) signal.
3 ERR_ARGS The script was called incorrectly.
4 ERR_VVP_HOME The script could not find the vvprint executable.
5 ERR_GSHOME The script could not find the gs executable.
6 ERR_GS_LIB The script could not find the initialization files for gs.
7 ERR_X_LIB The script could not find X libraries (Sun platforms only).
8 ERR_VVPRINT An error occurred while running vvprint. Check the.results
file for details.
OS/CPU
Printing
System
Type
Port Names (parallel; scsi) Printer Interface Script
AIX AIX
/dev/lp0; /dev/scsi* $VV_HOME/config
IRIX SVR4
/dev/plp; /dev/scsi/* /var/spool/lp/interface