User`s guide

Appendix A:vvprint/vvlpr Commands & Parameters
28 - PShop User’s Guide
orientation - portrait,
landscape,
automatic
Set image orientation. Default is “auto-
matic”.
scaling=n 100 n > 0,
scale,
none
Set the image scale factor (percent) rela-
tive to the image size. A value greater
than 0 will scale the image by a factor of
“n” percent, while “scale” will scale the
image to fit the printable area and “none”
will cause the image not to be rescaled.
An bitmap image's size is determined by
its dpi in conjunction with the pdpi
parameter. A PostScript image's size is
defined within the PostScript data.
pdpi=n 72 n > 0 Set the image's resolution in dots per
inch. Used for determining an image's
size if the image file does not define the
dpi explicitly. This value will apply to
xres and yres if they are not explicitly set.
This parameter is ignored when printing
PostScript/PDF.
xres=n
yres=n
- n > 0 Set the image's x and y resolution in dots
per inch. Used for determining an
image's size if the image file does not
define the dpi explicitly. These take the
value of pdpi by default. These values are
ignored for PostScript data.
Parameter(precede each
with a '-')
Default
Value
Acceptable
Values
Explanation