User`s guide

Appendix A:vvprint/vvlpr Commands & Parameters
26 - PShop User’s Guide
Parameter Table
Parameter(precede each
with a '-')
Default
Value
Acceptable
Values
Explanation
General Controls
id=<s|g>:bus:id
id=bus:id
id=id
id=path
- bus = 0 to 3
id = 0 to 7
path
Set the output device to a SCSI or GPIB
bus:id or a PShop ID file. If the value is
not set, PShop will print to the first sup-
ported printer found which is not already
in use. Note that any referenced id file
must reside in $VV_HOME/config.
ifs=path - path Read command line options in the file
given by “path”. Parameters given on the
command line override those specified in
the ifs file.
swlut=path - path Read color managment look up table set-
tings from the specified file. For more on
this please see Appendix F.
lpg=n - n > 0 Set last page to print.
rfs=path - path Write the exit status to the file given by
“path”.
fpg=n 1 n > 0 Set first page to print.
lpg=n - n > 0 Set last page to print. By default
copies=n 1 n > 0 Set number of copies to print.
help - none Print all available command line options.
v - none Print version information.
debug=n 0 0 to 9 Set debug output level
deltmp=n 1 0, 1 Turn on/off the deletion of temporary
files generated by PShop.