User`s guide

Appendix A:vvprint/vvlpr Commands & Parameters
PShop User’s Guide - 23
• in the user's .vvprintrc file
• in the printer’s ID file.
IFS Files
An IFS contains all the varaibles specific to each printer. A complete list of these
is available below starting at page 23. If you are using two or more SCSI printers,
you will need to uncomment the id line and enter the SCSI id for each printer.
Additionaly, if you would like to use a Software Look Up Table, this is where you
would specify the location. For more on Look Up Tables, please see Appendix
F, “Software Look Up Tables”, for more information .
Sample IFS file for the FUJI 3000 printer:
#
# VVPRINT "ofs" settings file for Fuji 3000 printer.
# Created: Thu Feb 11 19:31:00 1999
#
# If you have more than one SCSI printer
# you will need to set the ID for each
#id SCSI:0:0 # printer index
pdpi 72 # default input file dpi
scaling 100 # print scaling
xres 300 # X resolution in DPI
yres 300 # Y resolution in DPI
orientation 0 # image orientation: 0=auto, 1=portrait,
2=landscape
bright 0 # brightness -9 to 9
colormatch 0 # turn on 1 or off 0 colormatch
contrast 0 # contrast -50 to 50
invert 0 # 0 = non inverted 1 = inverted
density 0 # density/saturation -100 to 50
hue 0 # set the hue balance -70 to 70
papertray 1 # 1 full size, 2 half size
mirror 0 # horizontal mirror: 1=on, 0=off
redbal 0 # set the color balance for channel
-256 to 256
greenbal 0 # set the color balance for channel
-256 to 256
bluebal 0 # set the color balance for channel
-256 to 256
#swlut /opt/Vividata/lut/fu3000.lut # swlut