User`s guide

Chapter 2:Software and Hardware Installation
PShop User’s Guide - xxiii
include them.Edit Printer Configuration File: Pops up a text editor with the
printer’s configuration file loaded.
Installing the Kernel SCSI Driver for SunOS 4.x, HP-UX 10.x & AIX
Now you are ready to invoke the installation script. This script will lead you
step-by-step through the kernel driver installation, prompting you where
necessary. To begin, go to the PShop directory and enter:
# ./bin/vv_install
The install script installs device drivers into the current kernel of the system. This
system must be the one to which your scanner your printer will be connected. If
the installation is NOT running from the target host, exit the installation program
and install on the correct machine.
Configuring the Environment
Please see “Configuring the Environment” on page xxiv for details on setting up
your environment.
Installation Complete
You are now ready to use PShop.
Removing PShop
Should it be necessary to remove PShop from your system, become root and
execute the following commands:
On Solaris, you should also remove the driver package:
# pkgrm VVvvsc
If you need to remove a printer, use the -x option to lpadmin:
# lpadmin -x printer_name
If you have used the printer, the print script will have created a results file in the
printer’s directory, /etc/lp/printers/printer_name. “lpadmin -x” will not remove
this directory, and will print an error. If this happens, remove the directory
manually to complete printer removal.
To remove the software, switch to super-user mode and enter:
# rm -r Vividata_directory