User`s guide

Chapter 2:Software and Hardware Installation
PShop User’s Guide - xxi
Figure 2-2 ps_install Remote Print Queues GUI
If a remote queue you want to connect to does not already exist, you can create
it by filling in the following fields:
Remote System Name - the host name of the remote system to which the
remote printer is attached.
Remote Queue Name - the name of the print queue on the remote system
to which the printer is attached, or put another way, the name of the
“printer” within the remote system.
Local Queue Name - the name of a new print queue on the local system
that will be used to transport data from the local system to the remote
system.
Once you have filled in the fields, click “Create Remote Queue” to create the
remote print queue. The new queue should now be displayed in the list.
Select a print queue from the list to connect to, and click “Close”. The name of
the print queue you have selected should now be displayed next to the “Connect
to Remote Printer” check box. The printer port will also be changed to the name