Specifications

EPL-5700 Chapter4 Disassembly and Assembly
Rev. A
4-1
0
4.2.8 Interlock Switch Removal
1. Remove the right cover.(See section 4.2.2)
2. Remove the control panel. (See section 4.2.6)
3. Remove the front cover. (See section 4.2.7)
4. Remove the harness of the inter lock switch from the switch.
5. Remove one CS screw(3x5) securing inter lock switch bracket to the
printer.
6. Remove two CP(O) screws securing the inter lock switch to the bracket,
and remove the inter lock switch.
CP(O) (2x10)
Interlock Switch
CS(3x6)
Interlock Switch
Bracket
Interlock Switch
Harness
Figure 4-13. Interlock Switch Removal
In case of removing the inter lock switch, make
sure to perform interlock switch positioning
adjustment when assembling. (Refer to Chapter5)