Specifications

EPL-5700 Chapter4 Disassembly and Assembly
Rev. A
4-
8
4.2.6 Control Panel Removal
1. Remove the right cover. (Refer to section 4.2.2)
2. Remove two CS screws(3x8) securing the control panel to the shield
cover of the main board.(One screw is on the side of the cover and the
other one is on the top surface)
CS(3x8)
Control Panel
Figure 4-9. Fixing Screws for Control Panel
3. Push the control panel back once and release the connection between
the front cover and hook of the control panel. Then, lift up the control
panel a little bit.
4. Remove the harness of the control panel from the connector on the main
board, and remove the control panel.
Control Panel
Harness of the Control Panel
Front Cover
Hooks of the
Control Panel
Figure 4-10. Control Panel Removal