Specifications

EPL-5700 Chapter4 Disassembly and Assembly
Rev. A
4-
5
4.2.2 Right Cover Removal
1. Lift up the tab part of the cover a little bit, which is fixing the right cover to
the hook of the shield cover, and release the fixing.
2. Pushing the right cover toward back a little bit, remove the cover to the
right side.
Hook of Shield Cover
Right Cover
Tab
Figure 4-3. Right Cover Removal
CHECK POINT
9
When assembling the right cover, attach it so that
two hooks of the cover can match with the
corresponding holes on the printer side(shield
cover). Refer to figure4-4.
Corresponding Holes
of the Shield Cover
Hooks of Right Cover
Figure 4-4. Installing the Right Cover