Specifications

EPL-5700 Chapter4 Disassembly and Assembly
Rev. A
4-
3
4.2 DISASSEMBLY PROCEDURE
This section explains disassembly procedure for major mechanism and unit,
which composes this printer. Refer to the flow chart. The assembly
procedures are not described, except for special notes where necessary,
because assembly can be accomplished by performing disassembly in
reverse order. Refer to the exploded diagram in the end of this book when
you need to disassemble the parts, which are not mentioned.
Start
Right Cover Removal
Control Panel Removal
Front Cover Removal
Left Cover Removal
Top Cover Removal
Rear Cover Removal
Fusing Unit Removal
Disassembling the
Fusing Unit
Heater Lamp Removal
Transfer Roller
Exchange
Paper Feed Roller Removal
Paper Empty Sensor(PE1)
Removal
ROM Exchange
Interlock Switch Removal Main Control Board Removal
Print Head Unit Removal
Paper Feed Roller Unit
Removal
Paper Feed Solenoid Removal
Power Board Removal
High Voltage
Board Removal
Paper Feed
Sensor(PS1) Removal
Main Motor Removal
Paper Eject Sensor
(PS3) Removal
Thermister, Thermostat Removal
Driven Unit Removal
Figure 4-1. Flow Chart of Disassembly