Specifications

EPL-5700 Chapter4 Disassembly and Assembly
Rev. A
4-
2
4.1.2 Recommended Tools
Use the tools listed in Table below for disassembling and assembling the
printer.
Table 4-1. Recommended Tools
Name Availability Code
+ Screw driver #1 O B743800100
+ Screw driver #2 O B743800500
Screw driver O B743000100
Tweezers O B641000100
Round-nose pliers O B740400100
4.1.3 Specification for Screws
Abbreviations are used for small parts such as screws and washers. Table
below shows these abbreviations.
Table 4-2. Specification for Screws
Abbreviation Appearance Name
CBS + Bind S tight screw
CP(O) Cross-recessed Pan head
with spring washer and
plain washer.
CBB + Bind B tight screw
CS + Cup screw
CSB + Cup B tight screw
4.1.4 Work Completion Check
If any service is made to the printer, use the check list shown below, to
confirm that all works are completed properly and the printer is ready to
return to the user.
Table 4-3. Check Sheet
Category Parts Check Points Status
Operation Control Panel Are the indication of LED, LCD
and their operations normal?
OK
NG
Heater lamp Does it operate normal?
OK
NG
Status sheet
printing
Does the printer print
normally?
OK
NG
Data printing Can data be printed normally
at the all operation
modes(ESC/Page, ESC/P and
ESC/PS)?
OK
NG
Adjustment Printing
position
adjustment
Does printing position meet
the specification?
OK
NG
Interlock
switch
positioning
adjustment
Does the interlock switch
work?
OK
NG
ROM
version
--- Is it newest version? Version:
Cleaning
---
• No obstacles on the paper
path?
• Is the surface of paper feed
clean?
• No obstacles on the
surface of the fusing roller?
• Is the exterior case clean?
OK
NG
Packing ---
• Is everything in the
package?
• Is packing condition OK?
OK
NG