Specifications

EPL-5700 Chapter3 Troubleshooting
Rev. A
3-
3
3.3 PRINTER CONDITION
3.3.1 Indication
This printer always monitors its condition and indicate it on the control panel
by necessity. Indication of the printer condition are classified following as
follows.
Status: No error.
Error: Error occurs.
Warning : Warning occurs.
Service Req. Error: Service Req. Error occurs and requires service by
service man.
Table 3-4. Printer Message List
Condition Indication Status
Turn on All lights On. Status
System Check Memory light On, then goes
Off.
Status
Reset all All lights are On. Status
Reset Paper, toner, memory light
are On.
Status
Warming-up On-line light flashes. Status
Paper Jam/ Feed
Jam/Exiting Jam
Paper and Continue lights
On.
Error
Printer open Paper and Continue lights
On.
Error
Paper out Paper light flashes, and
Continue light On..
Error
Paper set Paper and Continue lights
are on.
Error
Table 3-5. Printer Message List (Cont.)
Condition Indication Status
Toner out Toner and Continue lights
On.
Error
Memory Overflow Memory light On. Continue
light flashes.
Error
Print Overrun Memory light On. Continue
light flashes.
Error
Service Req. Error All lights flash(0.8 sec.) and
off(0.2 sec), then individual
light flashes on and off in a
repeating cycle.
Service Req.
Error
Check paper size Paper light flashes. Warning
Image optimum Memory light flashes. Warning
Need Memory Memory light flashes. Warning
Toner Low Toner light blinks. Warning
3.3.1.1 “Status” Conditions
Here explains each status condition.
System Check: Printer is checking condition, or performing
initialization.
Reset All: Printer is processing warm boot.
Reset: Printer is processing reset.
Warm-up: Printer is warming up.