Specifications

EPL-5700 Chapter1 Product Description
Rev. A
1-1
3
*10 Indicated only when NLSP EDG OEM Scalable Font ROM for
Greek*
13
.
*11 Indicated only when NLSP EDG OEM Scalable Font ROM for
Cyrillic*
13
.
*12 Indicated only when NLSP EDG OEM Scalable Font ROM for
Latin*
13
.
*13 When changing the “SymSet” to this value, “Font Source” and “Front
Number” is set to “Resident” and “0”. So it is necessary to change
“Font Source” and “Front Number” to the font which supports this
symbol set.
*14 Only applied to LJ4 and ESC/Page mode.
*15 Either pitch or height will be displayed.(decided by selected font)
*16 Factory setting for Europe and Pacific.
*17 Factory setting for North America.
1.3.4 Special(alternative) Operation
1.3.4.1 Operation at Power On
After turning the power on while pressing a particular button, and keep
pressing the switch until the paper feed lamp, toner lamp and memory lamp
are turned on, following function will start.
Hexadecimal Damp
Turn on the power while pressing the Form Feed switch, then the
printer will enter damp mode. The received data is converted by
hexadecimal ASCII and printed out.
This function is canceled by Warm Boot(see page 1-8) or turning
power again.
Toner Reset
Turn on the power while pressing On Line switch and Form Feed
switch, the left toner quantity is reset and becomes toner full
condition. (E F)
Then, printer returns to the normal condition.
OPC Drum life reset
Turn on the power while pressing On-line switch and Continue switch.
The printer sets OPC drum life 100%.
Then, printer returns to the normal condition.
Following is not opened to the users.
Initialization of EEPROM
Turn on the power while pressing On-line switch, Continue Switch and
Alt switch. Then, EEPROM setting returns to the original settings,
which were set at the factory. All setting including the total print count
is cleared.
Then, printer goes to Warm Boot and returns to the normal condition.