Specifications

EPL-5700 Chapter1 Product Description
Rev. A
1-
4
ELECTRICAL SPECIFICATION
Power supply:
120 model
120V +/- 10%, 50-60Hz +/-3Hz
200V model
220 to 240V +/- 10%, 50-60Hz +/- 3Hz
Electrical characteristic
1) AC line noise:
Pulse width: 50 to 1000 ns
Pulse polarity: ±
Repeat: non-simultaneous
Modes: common/normal
Voltage: 1kv
However, the parts can withstand up to 2kv without damage.
2) Instant cutoff: DIP 100%(for standard voltage-10%) for one
cycle with normal print quality.
3) Electrostatic durability:
up to ± 10kv: no hardware errors
no unrecoverable software errors for the operator
up to ± 15kv: without damage to components
4) Rush current: 1/2 cycle, 50A or less
5) Insulation resistance: 10 M Ω or less
6) Dielectric strength: Assuming the following voltages are input for
one minute with no breakdowns.
120V model: AC 1000V(duration of one
surge)
200V model: AC1500V(duration of one
surge)
7) Leakage current: 3.5mA or less (120V model)
3.5mA or less (200V model)
DIMENSIONS
Dimensions: Main unit 397(W)mm x 463(L)mm x251(H) mm
Weight: Approximately 7.5Kg(not including expendable or
optional parts)
RELIABILITY AND DURABILITY
Product life Approximately 180000 printed pages or five years,
whichever comes first.
MPBF: 25000 sheets or more
Note) This is the average number of sheets before a breakdown will
occur that either requires the change of parts or for which the user is
unable to resolve.
MTBF: 3000 hrs(10 months) or more
Paper Feed Reliability(for recommended paper or normal paper)
Jam rate: 1/2000 or less(not including multiple pages)
Misfeed: 1/2000 or less
Multiple page feed rate: 1/500 or less
Paper wrinkling: 1/1000 or less
Paper leading edge folds: 1C or more, 1/1000 or less
Instances of only 1C excluded*1
Note) *1: 1C signifies a corner folded
1mm.