Specifications

EPL-5700 Chapter1 Product Description
Rev. A
1-1
1.1 FEATURES
EPL-5700 is a small and compact A4 size page printer that semiconductor
laser beam scanning is applied for. Following shows features.
Figure 1-1. Exterior View
PROCESS SPECIFICATION
Method: Dry mono-component xerographic method
Light source: Semiconductor laser
Photoelectric unit: OPC drum(organic photoconductor)
Charge: Rotating brush charging type
Developer: Exposed section developer system
Toner: Mono-component nonmagnetic toner
Transfer method: Roller transfer
Fixing: Heat roller system
Density regulator: Developer bias variation system(user can regulate)
PRINT SPEED
Resolution: 600 dpi
Print Speed: 8ppm(A4/LTR/B5/A5),
6.9ppm(legal)
*1:Same with optional cassette
*2:Regarding printing with custom size(non-standard
size)paper, the printing speed will become faster
because cleaning takes place automatically.
First print: 19 seconds(A4/LTR), 18.2 seconds(B5)
17.3 seconds(A5), 20.2 seconds(legal)
Warm-up time: 20 seconds or less (at 23 degree Celsius, standard
voltage)
PRINTABLE AREA
Print area Area within margins of 4mm from each side.
(Refer to Figure 1-2)
Note) The printable area may change depending on
the print mode.
Printable Area
4mm
4mm
4mm
4mm
Figure 1-2. Printable Area