Specifications

EPSON Stylus COLOR 3000
8 - EPSON Stylus COLOR 3000 5/97
4. If you want to print the default-setting instructions in
another language, press the
Micro Adjust U button until
the
Ink Out B Yellow and Ink Out B Magenta lights on
your control panel indicate the language you want to use.
English Both lights off
French
Ink Out B Yellow on
and
Ink Out B Magenta off
German
Ink Out B Yellow flashing
and
Ink Out B Magenta off
Italian
Ink Out B Yellow off
and
Ink Out B Magenta on
Spanish Both lights on
Portuguese
Ink Out B Yellow flashing
and
Ink Out B Magenta on
5. Press the
Pause button. The printer prints instructions on
changing the default settings.
6. Follow the instructions on the sheets to change the
necessary settings. Your changes remain in effect until you
change them again. (To exit without changing any settings,
press the
Pause button.)
7. When you’re finished changing settings, press
Load/Eject if
you need to eject any loaded paper. Then turn off the
printer to exit default-setting mode.
8. Wait five seconds, then turn on your printer to resume
printing normally.
Installing an Ink Cartridge for the First
Time
1. Press the P Operate button to turn on the printer. The
Operate light and all four Ink Out lights come on and the
Pause light begins flashing.
2. Open the ink cartridge compartment by pressing the top of
the ink compartment door. You see four slots for the ink
cartridges.
3. Open the ink cartridge packages.
4. Insert the cartridges, foil plug first, arrow on top, into the
slots. Insert cartridges in the following order: yellow,
magenta, cyan, and black. Each cartridge is “keyed” so it can
be inserted into the correct slot. Push each cartridge all the
way into its slot until it meets resistance and the
corresponding ink cartridge light turns off.
Warning:
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water.
5. Close the ink compartment door. The printer begins
charging the advanced ink delivery system.
Charging takes up to 10 minutes, with the
Pause light
flashing until it’s finished then the
Pause light stays on.
Do not turn off the printer or interrupt this important
process or you’ll use up more ink than necessary.
Caution:
Never turn off the printer when the Pause light is
flashing. However, if the Pause light is still flashing
after 15 minutes and the printer is not moving or
making noise, you may turn off the printer.
6. When the Pause light stops flashing, the ink charging
process is finished. Press the
Pause button to turn off the
Pause light.