Service manual

SERVICE MANUAL MASTER FILE

ENGLISH

Rev. A (1997/05/07)

4-22

.2.10.10 Ribbon Drive (RD) Assembly Removal

1• Remove the printer mechanism. (See Section 4.2.9.)

1• Remove the Platen. (See Section 4.2.8.)

1• Remove the hexagon nut and the washer securing the LEVER,G,ADJUST to the

SHAFT,CR,GUIDE, and remove the lever.

1• Remove the BUSHING,PARALLEL,ADJUST to turn around the SHAFT,CR,GUIDE. (See

Section 4.2.10.8.)

1• Remove the harness of PG Detector. (See Section 4.2.10.4.)

1• Remove the harness of HP Detector from the LEFT FRAME.

1• Remove 4 CBS (M3

8) screws securing the LEFT FRAME of the printer mechanism, and

remove the LEFT FRAME.

1• Remove the CBC (M3

8) screw and the CBB (3

8) screw securing the ribbon drive

assembly.

1• Release the ribbon drive assembly engaging with the ROLLER ASSEMBLY,DRIVE, and

remove the ribbon drive assembly.

CBC (M 3 x 8)

R ibbon D rive A ssem bly

CBB (3 x 8)

FRAM E, FRO NT

ROLLER ASSEM BLY,DRIVE

Figure 4-22. RD Assembly Removal