Service manual

SERVICE MANUAL MASTER FILE

ENGLISH

Rev. A (1997/05/07)

4-21

.2.10.9 Rear Paper Guide Assembly Removal

1• Remove the printer mechanism. (See Section 4.2.9.)

1• Remove the Platen. (See Section 4.2.8.)

1• Remove the hexagon nut and the washer securing the LEVER,G,ADJUST to the

SHAFT,CR,GUIDE, and remove the lever. (See Section 4.2.10.8.)

1• Remove the BUSHING,PARALLEL,ADJUST to turn around the SHAFT,CR,GUIDE. (See

Section 4.2.10.8.)

1• Remove the PG Detector. (See Section 4.2.10.4.)

1• Remove the harness of HP Detector.

1• Remove 4 CBS (M3

8) screws securing the LEFT FRAME of the printer mechanism, and

remove the LEFT FRAME.

1• Remove the Head FFC from the FRAME,REAR of the PRINTER MECHANISM.

1• Remove 2 CBS (M3

8) screws securing the FRAME,REAR to the RIGHT FRAME, and

remove the REAR PAPER GUIDE ASSEMBLY.

1• Push the clip on the bottom of the REAR PAPER GUIDE ASSEMBLY, and slide out the REAR

PAPER GUIDE ASSEMBLY from the FRAME REAR.

C lip

FRAM E,REAR

CBS(M 3 x 8)

LEFT FR AM E

REAR PAPERGUIDE ASSEM BLY

FRAM E,REAR

Figure 4-21. REAR PAPER GUIDE ASSEMBLY Removal