Service manual

SERVICE MANUAL MASTER FILE
ENGLISH
Rev. A (1997/05/07)
4-19
.2.10.6 Front PE (Paper End) Detector Removal
1• Remove the printer mechanism. (See Section 4.2.9.)
1• Remove 2 clips of the front PE detector attached to the REAR PAPER GUIDE ASSEMBLY,
and remove the detector.
1• Disconnect the harness from the detector.
REAR PAPER GUIDE ASSM EBLY
Front P E D etector
C lip
Figure 4-17. Front PE Detector Removal
.2.10.7 Rear PE Detector Removal
1• Remove the printer mechanism. (See Section 4.2.9.)
1• Hold the printer mechanism horizontally.
1• Release 2 clips of REAR PAPER GUIDE ASSEMBLY attached Rear PE detector.(
①
)
1• Release 2 notches of the REAR PAPER GUIDE ASSEMBLY attaching the detector to it, slide
the detector toward rear a little, and then remove the detector downward. (
②
)
1• Disconnect the harness from the detector.
Rear PE Detector
C lip s
REAR PAPER G UIDE ASSEM BLY
FRAM E,REAR
Figure 4-18. Rear PE Detector Removal