Service manual

SERVICE MANUAL MASTER FILE
ENGLISH
Rev. A (1997/05/07)
4-18
.2.10.4 PG (Platen Gap) Detector Removal
1• Remove the printer mechanism. (See Section 4.2.9.)
1• Remove 2 clips of PG detector attached to the LEFT FRAME of the printer mechanism and
remove the detector.
LEFT FR AM E
C lip
P G D e te c to r
Figure 4-15. PG Detector Removal
.2.10.5 Release Detector Removal
1• Remove the printer mechanism. (See Section 4.2.9.)
1• Remove 2 clips of Release detector attached to the FRAME,SUB,RIGHT of the printer
mechanism, and remove the detector.
R elease D etector
FRAM E,SUB,RIG HT
C lip s
Figure 4-16. Release Detector Removal