Service manual

SERVICE MANUAL MASTER FILE
ENGLISH
Rev. A (1997/05/07)
4-16
.2.10.2 PF Motor Removal
1• Remove the printer mechanism. (See Section 4.2.9.)
1• Release the motor harness from the printer mechanism securing part.
1• Set the release lever to the vertical (Rear Push tractor) or forward (Push tractor) position.
1• Remove 2 CBS (M3
×
8) screws securing the PF motor to the FRAME,SUB,RIGHT, and
remove the PF motor.
CAUTION
In case of the release lever in the Friction feeding position, PF motor is
not released.
P F M o to r
CBS(M 3 x 8)
FRAM E,SUB,RIG HT
R elease Lever Position
M o to r H a rn e s s
Figure 4-12. PF Motor Removal