Specifications

REV.-B
1.1 FEATURES
The LQ-570/l 070 are small, light-weight, low-cost, printers with advanced paper handling that is
compatible with the LQ-5 10/550/1010. The printer’s main features are as follows:
●
●
●
●
●
●
●
●
●
Use of ESC/P 2 control codes
Ability to print multi-point fonts
Ability to receive and print raster graphic images
Compatibility with the
LQ/SQ series available on the market
Printing speeds: 225 characters per second
(CPS) (high-speed draft, 10 characters per inch (cpi))
252
CPS (draft, 12 cpi)
210
CPS (draft, 10 cpi)
84
CPS (LQ, 12 cpi)
64
cps (LQ, 10 cpi)
Optional interface card
Clear, easy-to-read printing with standard EPSON fonts
Multiple fonts resident in the printer
9 LQ fonts (Roman, Saris
Seri~, Courier, Prestige, Script, OCR-B, Script C, Orator, Orator-S)
1 draft font
Control panel switch selection of fonts, condensed, and cut-sheet feeder
(CSF) bin
Optional tractor unit for push-pull tractor feed
Flexible handling of continuous paper
Three ways to insert continuous paper (front/bottom/rear path)
Auto backout and auto loading (rear insertion)
Use of continuous paper without removing
CSF
Attachment of standard tractor unit in either of two positions (push/pull)
Easy handling of cut sheets with the optional cut-sheet feeder
Two ways to insert cut sheets (front/top)
Auto loading
The
LQ-570/l 070 are equipped with the standard EPSON 8-bit parallel interface. Various interface
(
options ensure compatibility with a wide variety of computers. Table 1-1 lists the interface options, Table
1-2 lists the optional units available for the
LQ-570/l 070, and Figure 1-1 shows an exterior view of
the
LQ-570/l 070.
.
Table 1-1. Interface Options
Model
Description
C82305
Serial interface card (inch screw)
C82306
Serial interface card (mini screw)
C82307
32KB serial interface card (inch screw)
C82308
32KB serial interface card (mini screw)
C82310
32KB parallel interface card
C82313
32KB IEEE-488 interface card
Printing is not possible for the following baud rates :
1800, 200, 134.5, 110, 75 bps.
NOTES: Refer to the “Optional Interface Technical Manual” for details.
The asterisks
(’) in the table above represent the last digit of the part numbers. This digit varies,
depending on the country. For instance, in the U.S. the last digit is 1.
1-1