Specifications

REV.-A
Are the characters aligned vertically?
NO ~ GO TO STEp 30
YES ~ GO TO STEP 4.
3. Referring the odd-numbered lines (Ist and 3rd), adjust the even-numbered lines (2nd and 4th).
“ If the even-numbered lines are shifted to
~ Press the LOAD/EJECT button once while
+ 1 and even lines shift to the left.)
● If the even-numbered lines are shifted to
the right:
pressing the ALT button. (The reference value increases
the left:
4.
5.
6.
7.
~ Press the LF/FF button once while pressing the ALT button. (The reference value decreases — 1
and even lines shift to the right.)
Press the
ALT, LF/FF, and LOAD/EJECT buttons at the same time.
The printer enters
LQ mode, and the printer prints the reference value and the “1” characters for 4
lines.
Are the characters aligned vertically?
NO ~ GO TO STEP 6.
YES
~ GO TO STEP 7.
Referring to the odd-numbered lines (1st and 3rd), adjust the even-numbered lines (2nd and 4th).
● If the even-numbered lines are shifted to the right:
~ Press the LOAD/EJECT button once while pressing the ALT button. (The reference value
increases + 1 and even lines shift to the left.)
● If the even-numbered lines are shifted to the left:
~ Press the LF/FF button once while pressing the ALT button. (The reference value decreases — 1
and even lines shift to the right.)
Turn printer power off.
4-5