Specifications

REV.-B
3.2.5.7 Removing and Disassembling the PAPER GUIDE (Including the DETECTOR ASSY., HP)
1.
Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).
2. Remove the PLATEN from the PRINTER MECHANISM (see Section 3.2.5.5).
3. Remove the FRAME, MAIN, RIGHT from the FRAME, MAIN, BASE (see Section 3.2.5.6).
4. Remove the three springs (32 gm) from the lower side of the PRINTER MECHANISM . (These springs
join the PAPER GUIDE support to the FRAME, MAIN, BASE.)
5. While holding open the clips that secure the PAPER GUIDE to the FRAME, MAIN, BASE, slide the
PAPER GUIDE to the left. Remove the PAPER GUIDE.
6.
7.
8.
Open the clips that
IDE
AIN, BASE
EXTENSION SPRING, 43
(“ This picture is 80-column)
Figure 3-19. Removing the PAPER GUIDE
hold the SPUR GEAR, 18 to the ROLLER
ASSY., PF, DRIVE. Remove the SPUR
GEAR, 18 from the ROLLER
ASSY., PF, DRIVE.
Remove the ROLLER
ASSY., PF, DRIVE from the PAPER GUIDE.
Slide the PAPER GUIDE support to the right. Remove the PAPER
GUIDE.
GUIDE support from the PAPER
A
PAPER GUIDE
(“
ROLLER
R,
This
18
picture
is
80-column)
PAPER GUIDE A&W., SUPPORT
Figure 3-20. Removing the PAPER GUIDE ASSY., SUPPORT
3-15