Specifications

REV.-A
3.1.3 Service Checks After Repair
When printer components are to be sent back to the customer after servicing, first use the checklist
shown in Table 3-3 to note the current state of the components. This checklist provides a record to
make servicing and shipping more efficient.
Table 3-3. Inspection Checklist for Repaired Printer
Category
Component
Item to Check
Is Check Required?
Printer
Printhead
l
Are any wires broken?
Checked, Not necessary
features
Are any wires worn out?
lChecked, Not necessary
Carriage
Does the carriage move smoothly?
lChecked, Not necessary
mechanism
El
Movement noisy,
Mechanism dirty,
Mechanism oily
l
Is the carriage motor running at the correct
Checked, •! Not necessary
temperature and not overheating?
lChecked, Not necessary
Paper
Is the paper advancing smoothly?
lChecked, •! Not necessary
advance
Movement noisy,
Mechanism dirty,
mechanism
Mechanism oily
Is the paper advance motor running at the
lChecked, Not necessary
correct temperature and not overheating?
Paper path
l
Is the type of paper in the printer feeding
Checked, Not necessary
smoothly?
l
Is the tractor feeding the paper correctly?
Checked, Not necessary
Is the paper path clear of all obstructions?
lChecked, Not necessary
Is the platen free of damage?
lChecked, Not necessary
Ribbon
Is the ribbon mask free of distortion?
lChecked, Not necessary
mask
Self-print
l
Was the self-print test successful?
Checked, •l Not necessary
test
On-line test
Was the on-line test successful?
El
Checked, Not necessary
\djustment
Printhead
Is the platen gap adjusted correctly?
Checked, Not necessary
Printing
l
Is the bidirectional print position adjusted
Checked, Not necessary
correctly?
DIP switch
Have DIP switches been reset to their
facto-
Checked, Not necessary
settings
ry shipment settings?
;ystem
ROM
l
The ROM version is XXX.
El
Checked, Not necessary
Ipgrade
version
;hipment
!
Has the ribbon been removed?
Checked,
Not necessary
Have all relevant parts been included in the
Checked, Not necessary
shipment?