Specifications
Appendix B
Removing
the C062 PSB Power Supply Board Assembly
1.
Remove the upper housing assembly. (See Section 3.2.2.2.)
2.
Remove the cable from connector CN13 on the main board assembly.
3.
Remove the cable from connector
CNl
on the power supply board assembly.
4.
Remove 5 CBB(C) (M3 x 10) screws and 1 CB (M3 x 8) screw that hold the power
supply board assembly to the lower housing assembly. Then remove the power
SUPPlY.
Note: The power supply is secured with a one-way screw that requires the special
tool illustrated below for removal.
Power supply Boald
E’i.glWC?
B-12. Removing the Power Supply Board
Assembly
Special Tool
CO62 PSB Power Supply
Board
Assembly
(M3
x
8)
,CN13
cCN1
CBWC)
(M3
X
10)
Serowr
Epson
LQ-570+/1
070+
B-17