Specifications

Appendix B
Jumper Differences
LQ-570+/1070+
When jumper 512 is connected to SLIN, the printer recognizes the SELECT IN
signal Corn the host.
LQ-570/1070
When jumper 53 is connected to GND, the SLCT-IN signal is fixed to LOW.
Printer Weight Difference
LQ-570+/1070+
LQ-570/1070
15 lb. (6.8 kg)/20 lb. (9.5 kg)
13.5 lb. (6.1 kgY18.6 lb. (8.4 kg)
Printer Height Difference
LQ-570+11070+
6.3 inches
LQ-570/1070
6 inches
Weight Difference for Cut Sheet Carbonless Duplicating Paper
LQ-570+/1070+
LQ-570/1070
12 to 15 lb paper, maximum
17 to 24 lb., maximum
Lower Noise
LQ-570+11070+
46.5 dB(A)
LQ-570/1070
55 B(A)
Power Consumption
LQ-570+/1070+
LQ-570/1070
33 W/36W 33w
(during a self-test in draft mode at 10 cpi)
Mean Cycles Between Failures (MCBF)
LQ-570+/1070+
3 million lines, excluding printhead (same as LQ-570/1070)
Differences in Power On Function with Buttons Held Down
Button LQ-570 LQ-570/1070+
LFIFF Prints PROM version, DIP switch
Prints rotating pattern of LQ fonts
settings, rotating pattern of LQ fonts
LOAD/
Prints PROM version, DIP switch
EJECT
settings, draft font pattern
Prints draft font pattern
ALT No function
Prints PROM version and DIP
switch settings and ejects page
B-4
Epson LQ-570+/1 070+