Specifications

REV.-A
(7) FONT Button
Pressing this button selects a font, and pressing it continuously selects the next one, sequentially. The
FONT LED indicates the currently selected font.
(8) CONDENSED Button
Pressing this button toggles the printing mode between normal and condensed, alternatively.
NOTE: Selections of the FONT and CONDENSED buttons
and the CONDENSED selection become effective
INDICATORS
(1) OPERATE (green)
are stored as defaults, so that the last FONT
when the printer is initialized.
Lit when the printer’s OPERATE button is on, and AC power is supplied.
(2) PAUSE (orange)
Lit
(3)
Lit
(4)
Lit
(5)
when the printer is in PAUSE-mode (no printing, no paper feeding, and not accepting data).
TEAR-OFF (orange)
when the sheet is advanced to the tear-off position.
DATA (orange)
when the printer has received data from the host. .
PAPER-OUT (red)
Lit when the paper-out detector senses no paper. Refer to Section 1.6.3, Paper-out Detection and Forms
Override Function.
(6) MULTI-PART (green)
Lit when the adjust lever is
(7) BIN 1 (green)
Lit when bin 1 is selected.
(8) BIN 2 (green)
Lit when bin 2 is selected.
positioned at the 4th step or higher,
(9) FONT (green) - Draft, Courier, Roman, Saris Serif, Prestige, Script, Script C, Orator, Orator-S, OCR-B
These indicators show the currently selected font.
(10) CONDENSED (green)
Lit when condensed mode is selected.
1-17