Specifications

REV.-B
3.2.5.12 Disassembling the TRACTOR ASSY.
1. Remove the TRACTOR ASSY. from the printer.
2. Remove the SPUR GEAR, 17 from the SHAFT, TRACTOR.
3. Remove the FRAME, TRACTOR, RIGHT from the SHAFT, TRACTOR and the SHAFT, TRACTOR, GUIDE.
4. Remove RETAINING RING from the SHAFT, TRACTOR.
5. Remove the TRACTOR ASSEMBLY (RIGHT), the PAPER SUPPORT unit, and the TRACTOR ASSEMBLY
(LEFT) froin the SHAFT, TRACTOR and SHAFT, TRACTOR, GUIDE.
TRACTOR ASSEMBLY (LEFT)
ER SUPPORT
TRACTOR ASSEMBLY (RIGHT)
ACTOR, GUIDE
TAINING RING
I
SPUR GEAR, 17
Figure 3-27. Disassembling the TRACTOR ASSY.
3-19