Specifications

REV.-B
3.2.5.8 Removing the DETECTOR ASSY., HP
1. Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).
2. Remove the clips from the rear side of the FRAME, MAIN, BASE that hold the DETECTOR ASSY., HP.
Remove the DETECTOR ASSY., HP from the rear of the FRAME, MAIN, BASE.
Figure 3-23. Removing the DETECTOR ASSY., HP
3.2.5.9 Removing the DETECTOR ASSY., PE, REAR
1. Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).
2. Remove the two CBP(C) (M3 X 10) screws that hold the COVER, PLATEN, LOWER to the frame. Remove
the COVER, PLATEN, LOWER.
3. Remove the clips that hold the DETECTOR ASSY., PE, REAR in the PAPER GUIDE. Remove the
DETECTOR ASSY., PE, REAR
/
DETECTOR ASSY., PE, REAR
Figure 3-24. Removing the DETECTOR ASSY., PE, REAR
3-17