Specifications

REV.-B

While holding down the three PF lever assemblies, pull out and remove the release shaft. Remove the

PF lever assemblies and the compression spring (1300 gm) from the paper guide.

10. While holding open the clips that secure the DETECTOR ASSY., RELEASE to the PAPER GUIDE,

remove the DETECTOR ASSY., RELEASE.

LEVER ASSY., PF

(This illustration shows the LQ-570,

an 80column printer. The

136-column

printer has four paper advance rollers

and four springs.)

COMPRESSION SPRING, 1300

Figure 3-21. Removing the LEVER ASSY., PF

Point to Note for Assembly

Insert the SHAFT, RELEASE in the PAPER GUIDE in the way shown in the diagram below.

PAPER GUIDE (Right

Figure 3-22. How to Insert the SHAFT, RELEASE

3-16