Specifications

REV.-B
3.2.5.7 Removing and Disassembling the PAPER GUIDE (Including the DETECTOR ASSY., HP)
1. Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).
2. Remove the PLATEN from the PRINTER MECHANISM (see Section 3.2.5.5).
3. Remove the FRAME, MAIN, RIGHT from the FRAME, MAIN, BASE (see Section 3.2.5.6).
4. Remove the three springs (32 gm) from the lower side of the PRINTER MECHANISM (These springs
join the PAPER GUIDE support to the FRAME, MAIN, BASE.)
5. While holding open the clips that secure the PAPER GUIDE to the FRAME, MAIN, BASE, slide the
PAPER GUIDE to the left. Remove the PAPER GUIDE.
EXTENSION SPRING, 43
(This illustration shows
an 80column printer.)
Figure 3-19. Removing the PAPER GUIDE
the
LQ-570,
6. Open the clips that hold the SPUR GEAR, 18 to the ROLLER ASSY., PF, DRIVE. Remove the SPUR
GEAR, 18 from the ROLLER ASSY., PF, DRIVE.
7. Remove the ROLLER ASSY., PF, DRIVE from the PAPER GUIDE.
8. Slide the PAPER GUIDE support to the right. Remove the PAPER GUIDE support from the PAPER
GUIDE.
is illustration shows
80column printer.)
PAPER GUIDE ASSY., SUPPORT
Figure 3-20. Removing the PAPER GUIDE ASSY., SUPPORT
the
LQ-570,
3-15